Filter
Top Products
5. If you press to store the number in a Speed Dial
bin, you see:
– Select the Speed Dial bin (dial 701-720 or press the bin
key) you want to use +
HOLD to exit.
OR
If you press to store a new number (automati-
cally in Speed Dial bin 720), you see:
– Enter the line number (e.g., 1 for line 1), line group
number (e.g., 90 for group 0), or
ICM to store Intercom
codes + HOLD. (Check with your Communications
Manager for your line and line group numbers.)
– Following Speed Dial programming methods, enter the
number you want to store (up to 16 digits long, includ-
ing
MIC to store a pause and FLASH to store a Flash) +
HOLD to exit.
– You cannot enter a name using this option.
– If you already have a number stored in bin 20, you see:
– Press to enter a new number or to
back up to step 4.
OR
NOYES
NUM
BIN
Call Forwarding Off Premise
23
80000mfh08-01.qxd 12/10/04 3:20 PM Page 23