Filter
Top Products
You can customize your exten-
sion’s name. When you place an
Intercom call, the name you enter
shows on your co-worker’s dis-
play. If you are an attendant, you may also be able to program a
co-worker’s name as well as the name for a ring Group or UCD
Hunting Group. Check with your Communications Manager.
To program your extension’s name:
1. At a 22- or 34-Button Display
Telephone:
Press + + + .
At a Super Display Telephone:
Press + .
2. Follow the instructions in the Name Programming chart
on the next page.
3. Press + to exit.
To program a name for a co-worker’s extension:
You must have Access Level 4 or 5 to do this.
1. At a 22- or 34-Button Display
Telephone:
Press + + + .
At a Super Display
Telephone:
Press + .
2. When you see EXT:3xx, enter the number of the exten-
sion you want to program +
HOLD.
You can optionally enter a Ring Group or UCD
Group master number to program the name of the
associated group.
NAMEPROGRAM
NAMEMOREMOREPGM
NAMEPROGRAM
NAMEMOREMOREPGM
Name Programming
139
Program your extension’s
name from your telephone.
80000mfh08-01.qxd 12/10/04 3:20 PM Page 139