NEC DS1000/2000 Cordless Telephone User Manual


 
Installation
Using the Headband Style Headset with your Cordless Telephone
18 Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide
Connecting the Headset and using the Controls
To connect the headset and use the controls (Figure 22: Connecting the Headset and
Using the Controls):
Plug the headset into the Headset Jack on the top of the handset.
Use the Microphone Volume control to adjust the volume of your headset’s microphone
(i.e., your voice).
Use the Headset Receiver Volume control to adjust the volume of the receiver in your head-
set (i.e., your caller’s voice).
To temporarily turn off your headset microphone, slide the Microphone Mute switch into the
Microphone Muted position.
Clip the Belt/Lapel Clip to your belt or lapel to secure the headset cord.
Figure 22: Connecting the Headset and Using the Controls
80683 - 16
Belt/lapel clip
Minimum
volume
Maximum
volume
Headset receive vloume
Microphone mute
Microphone
muted
Microphone
ON
Microphone volume
More
volume
Less
volume