Filter
Top Products
Installation
Charging the Handset
10 ◆ Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide
Charging the Handset
Installing the Charger and Charging the Handset
To connect the AC Adaptor to the charger (Figure 8: Installing the Charger):
1. Run the AC adaptor cord under the strain relief on the back of the charger as shown.
2. Plug the AC adaptor cord into the charger.
3. Plug the AC adaptor into AC outlet.
4. Insert the handset into the charger.
When the handset is correctly inserted into the charger, the
CHARGE LED on the
charger is on.
Figure 8: Installing the Charger
Cleaning the Battery Charger Contacts
To clean the battery charger contacts (Figure 9: Cleaning the Battery Charger Contacts):
● Use a pencil eraser or soft cloth to periodically (once a month) clean the battery contacts.
Figure 9: Cleaning the Battery Charger Contacts
The handset must charge 5-8 hours in its charger prior to initial use.
80683 - 4
AC Adaptor
Strain Relief