NEC 92600MFH05 Cordless Telephone User Manual


 
With Voice Call Conference, others in your work area can easily join
into your outside calls. To initiate a Voice Call Conference, press a
uniquely programmed Voice Call Conference key and tell your co-
workers to join the call. The system releases the privacy on the line,
and other users can just press the line key to join in. The system allows
either four or eight parties maximum per Conference. Voice Call
Conference does not use the telephone system features to announce the
call. You just announce it "through the air" to your co-workers.
In addition to Voice Call Conference, there are other ways to have a tele-
phone meeting. See Conference (page 33), Meet Me Conference (page
63), Meet Me Paging (page 65) and Tandem Trunking (page 115).
1. Place or answer trunk call.
2. (Voice Call Conference).
3. Announce Voice Call Conference.
Just tell your co-worker's about the
call. Do not use telephone system fea-
tures to announce it.
1. After Conference request, press indicated
line key ( ).
1. to hang up.
To exit a Voice Call
Conference without
affecting the other
parties:
To join a Voice Call
Conference
(if invited):
To set up a Voice Call
Conference with a co-
worker in your imme-
diate work area:
Conference, Voice Call
34