Filter
Top Products
Client Installation
TAPI
4.0 User Guide
7
TAPI
Now, you are ready to use TAPI application from your client PC. To test
your client installation, launch
Phone Dialer
from
Start=>Programs=>Accessories.
Enter a number to call in the
Number to
Dial
box and then click on
Dial
button. If the installation is correct, your
extension should ring and once you pick up the telephone handset, the
system will dial the number you entered and you will be connected to that
number.
If it does not work or if you need to change any of your configuration
parameters,
• Go to
Start=>Settings=>Control Panel=>Telephony
. (In the case of
Windows 2000, go to
Start=>Settings=>Control Panel=>Modem
and Phone Options
)
• Click on the
Telephony Drivers
tab. (In the case of Windows 2000,
click on the
Advanced
tab)
• You should see an entry called
Communications Service Provider
.
Choose this entry and click on the
Configure
button.
• You will get a dialog box with an entry for your extension. Select that
entry, and click on the
Configure
button.
• You will now see a dialog that displays all of the detected devices
from NCS Serv. Click on the
Configure
button. You will get a dialog
box with an entry for your extension.
• To change any parameters, you should delete this entry and create a
new entry with the new values.
• To delete an entry, click on the
Extension
button. In the new dialog
box, enter the extension number and password of the entry you want
to delete and click on the
Delete
button.
• To add an entry, click on the
Extension
button. In the new dialog box,
enter the extension number and password of the entry you want to add
and click on the
Add
button.