Filter
Top Products
l
Depress ADD/ON button.
l
Dial three digit station number to be programmed.
l
Depress desired station DSS button (I-20)
l
Depress ADD/ON button again.
INTERCOM CALLING USING STATION DSS BUTTONS
l
Lift handset.
(Depress ONIOfFbutton if equipped with Speakerphone.)
l
Dial digit “1” to transmit
l
Depress desired station DSS button.
OR
tone signal. .
l
Voice announce after hearing tone burst;
NOTE: When calling a single line telephone, no voice announcement is available. Ring signal will automatically
be provided,
l
Depress ADD/ON button.
l
Depress desired speed dial button (II-20), or (I-20) when assigned expanded speed dialing.
l
Dial line access code (9,8,7 or 0).
l
Dial telephone number to be programmed
[pauses and hook flashes may be programmed into speed cfid).
l
Depress ADD/ON button again.
NOTE 1: Dialing access codes V”, “8” or “7” will cause a line to be selected automatically when using station speed dialing,
unless a line is manually selected. If “0” is dialed, an outside line must be manually selected.
NOTE 2: Depress HOLD button to program PAUSE; depress RECALL button for HOOKFLASH.
PLACING A CALL USING STATION SPEED DIALING
l
Lift handset or depress ON/OFF button,
l
Depress desired station speed dial button, (Depress line button if a particular line is desired).
l
When party has answered, use handset to begin conversation. (Handsef not required when
equipped
with Speakerphone.)