Filter
Top Products
SETTING CALL BACK REQUEST
l
Call station and receive “no answer” or Call Waiting Tone.
l Dial “#“.
l
Verify at display: ‘5” = accepted
“d” = denied
l
If accepted, your station number will flash intermittently in the called key set’s display, indicating your “call back request”.
SETTING AUTOMATIC CALL BACK
l
Call station and receive Call Waiting Tone.
l Dial “0”.
l
Verify at display: “Cb” = accepted “d” = denied
l
If accepted, you will receive tone signal when the called station becomes idle.
l
You may now lift the handset and proceed as if normal ICM call.
ACTIVATING TONE OVERRIDE
l
Call station and receive Call Waiting Tone.
l Dial “W.
l
Verify at display: “0” = accepted
“d” = denied
l
If accepted, tone will be sent through called key set’s speaker (or Single Line handset) and your station number will
appear in the key sets display.
NOTE: A Tone Override to your key set may be answered by depressing the HOLD button.
INTERCOM
CALLS