Filter
Top Products
User's manual BLUE Edition
Operating the navigation software - 44 -
3.4 Working with the map
Survey There are various pieces of information available on the MAP
screen. Learn in this chapter about the possibilities for working
with the map, which depend on whether you are in navigation
mode, or not.
Displaying the map On the main screen, tap the Show map button to open the M
AP
screen.
Using the delivered
maps
There are two CDs (CD-ROM2 und CD-ROM3) with additional
maps included in the delivery. If you wish to use one of those
maps on your navigation system, transfer the desired map from
the respective CD to a memory card using a memory reader.
Proceed then as described in "Selecting a map" (see below).
Selecting a map To load another map which is available on the currently inserted
memory card, proceed as follows:
Notice: If the desired map is on another memory card, remove
the card, which is currently inserted. MobileNavigator turns off.
Insert the card with the desired map. MobileNavigator turns on
again. Even if there is only one single map on the memory card,
you have to select it manually as described below.
1. On the main screen, tap the Choose map button.
The Available maps screen opens:
2. Tap the entry of the map you want to work with.
3. Tap OK.
The selected map is now loaded. The main screen opens.