MVOX electronic MV900 Conference Phone User Manual


 
6
11. Using the Voice Command Recognition and Voice Keypad (VKP)
To get into the voice command recognition mode, press and release the
Talk Button, wait for the voice prompt “Please Say Command.” Proceed by
saying one of the following commands.
Voice Commands Supported
Command
Home
Work
Voicemail Home
Voicemail Work
Voicemail Cell phone
Last Call
Setup menu
Cell phone name dialing
Dial number
Speed dial One
Speed dial Two
Speed dial Three
Speed dial Four
Speed dial Five
Speed dial Six
Speed dial Seven
Speed dial Eight
Speed dial Nine
Memory One
Memory Two
Memory Three
Memory Four
Memory Five
Memory Six
Memory Seven
Memory Eight
Memory Nine
Note:
“Home”, “Work”, “Voicemail Home, Work or Cell Phone”, and “Memory 1 through 9” require
users to set up the number in the setup menu first. Please refer to the setup menu section for
information on how to enter number.
Command Description
Dial Home number stored in memory
Dial Work number stored in memory
Dial Home voicemail stored in memory
Dial Work voicemail stored in memory
Dial Cell phone voicemail stored in memory
Dial last number (Redial)
Enter setup menu
Activate Cell phone voice dialing
Dial by using voice keypad
Dial speed dial one on the Cell phone
Dial speed dial two on the Cell phone
Dial speed dial three on the Cell phone
Dial speed dial four on the Cell phone
Dial speed dial five on the Cell phone
Dial speed dial six on the Cell phone
Dial speed dial seven on the Cell phone
Dial speed dial eight on the Cell phone
Dial speed dial nine on the Cell phone
Dial memory one number stored in memory
Dial memory two number stored in memory
Dial memory three number stored in memory
Dial memory four number stored in memory
Dial memory five number stored in memory
Dial memory six number stored in memory
Dial memory seven number stored in memory
Dial memory eight number stored in memory
Dial memory nine number stored in memory