Filter
Top Products
10
7. In the configuration / Voice/Fax screen, select one of the channels to be used for paging and click the
Auto Call Enable checkbox to enable the auto call feature. In the Phone Number field, enter x:y where
x equals the remote MultiVOIP identifying number and y equals the remote MultiVOIP Voice Channel
number. For example, on Corporate MultiVOIP channel 1 you would enter 2:1 to communicate with
Branch A voice channel 1. For best voice quality, configure the Voice Coder field to G.711 U-Law @ 64
kbps. For good voice quality requiring less bandwidth, configure the Voice Coder field to G.723.1 @ 6.3
kbps. You must use the same voice coder on channels that communicate with each other. Leave the
other fields set to defaults. Configure the other channels as needed and click Ok when finished.
Corporate Channel 1