Filter
Top Products
37
Some Additional Features
Instructions for performing commonly used features are given below.
Placing a call on hold:
1. Press the red HOLD key.
The status indicator of the held call flashes.
2. To retrieve the held call, press the line select key next to the flashing
status indicator.
Transferring a call:
1. While on a call, press the Trans/Conf softkey.
2. Dial the number of the third party.
3. Hang up
-or-
Wait until the called party answers and then introduce the caller being
transferred. After introducing the caller, hang up. If you receive busy tone
or no answer, press Back to Held softkey to return to the original call.
Setting up a 3-party conference:
1. While on a call, press the Trans/Conf softkey.
2. Dial the number of the third party.
3. When the called party answers, introduce the conference.
4. Press the Conference softkey to form the conference.
Making a directed page:
1. Press the Direct Page feature key.
2. Dial the extension number, or press the DSS key of the party being paged.
3. Broadcast your message.