Filter
Top Products
Mitel 5320 IP Phone User Guide
- 39 -
Emergency Calls
Warning for emergency number dialing: Consult your local authorities for Emergency
Numbers and 911 or equivalent service availability in your area.
There are two methods of dialing emergency numbers, based on the programming of your
MCD:
Emergency Call Routing NOT programmed
Emergency Call Routing programmed
CAUTION: Verify with your System Administrator which type of emergency
number dialing you can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number dialing should
only be performed by picking up the handset and selecting the Analog Line key you
have programmed. Emergency dialing using an IP connection may not be supported due to
ICP system configuration and country location. For more information, contact your System
Administrator.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING PROGRAMMED
Note: This procedure is in addition to the methods described above.
To make an Emergency Call if Emergency Call Routing is programmed:
1. Lift the handset.
2. Dial your Local Emergency Number (911 or equivalent).
Group Listen
With Group Listen, you can carry on a conversation using the handset or headset while
allowing others nearby to listen to the person at the far end over the handsfree speaker. The
handsfree microphone is disabled in Group Listen mode.
To activate Group Listen while in a handset conversation:
Press the Group Listen key.
Audio from the far-end party is now heard through both the handset/headset and the
speaker.
To make the call a normal two-way speaker call:
Press
(SPEAKER).