Filter
Top Products
-24-
Call Park - System
This feature allows you to park a call from any line on your telephone not
j
ust the prime line. The number of calls you can park is limited only by the
number available system park "orbits."
To park a call in system orbit:
1. Press the lit System Park feature key.
2. Do either of the following:
Hang up
Press the New Call softkey to get dial tone
Press a line key to answer a call, retrieve a call or hold, or get dial
tone.
To return to the caller if all the system orbits are busy:
z
Press the Back To Held softkey or CANCEL to return to the caller.
To retrieve a call parked on a system orbit from any extension:
z
While listening to dial tone, dial 57 followed by the park orbit number.
To re-park a call in a system orbit:
z
Press the Park Again softkey. The Park Again softkey only appears
immediately after answering the call.
Call Pickup
To answer a call that is ringing at another station in your Pickup
Group:
1. Lift the handset.
2. Press the Pickup feature key.
To answer a call that is ringing at a station not in your Pickup Group:
1. Lift the handset.
2. Dial *4.
3. Dial the number of the ringing station.