Mitel 4150 Telephone User Manual


 
-9-
Handsfree Operation
Your telephone is capable of both half-duplex and full-duplex handsfree
operation.
Both modes of operation allow you to conduct conversations without the use
of a handset or headset. Full-duplex operation allows you and another user
with full-duplex capability to converse without overridin
g
each other's voices.
The other user may be using a handset, a headset, or they may be in
speakerphone mode.
Full-duplex operation requires that your telephone be connected to an
external power adapter. For some environments (e.g. noisy locations), full-
duplex handsfree operation may not be suitable. To return to full-time, half-
duplex mode, disconnect the external power adapter.
For best performance, users should note the following:
z For best performance, users should note the following:
z
After a conversation begins, your telephone may take several seconds to
determine ideal speaker and microphone levels before commencing full-
duplex operation. During this time, your telephone will operate in half-
duplex mode.
z
While in speakerphone mode, your phone may temporarily shift to half-
duplex mode if room conditions chan
g
e (i.e. other persons enter the room)
or your hand passes in front of the microphone.
z Your speakerphone works best when all connected parties are in quiet,
echo-free environments. ( NOTE: Excessive background noise originating
with other connected parties can impair communication using the
speakerphone. If the noise persists, continue the call using the handset or
switch to half-duplex operation by disconnecting the power adapter.)
z
Do not place your phone near sources of noise such as PC fans, etc.
z You should face your telephone when you speak and you should be no
more than four to six feet away. Take care not to block the microphone
with papers or other objects.
z
Position the telephone so that you are facing a sound-absorbing surface,
such as an upholstered chair or soft wall panels, as you speak.