Filter
Top Products
19
4 Use the number keys to enter the name.
The name cannot exceed 14 characters.
• See the ”Steps for entering names and special characters“, page 20.
• Use the
*
/
t
/TONE and #/
s
to move the cursor to the desired position.
• Use the
DELETE/CHANNEL key to delete characters as needed.
• Press and hold
DELETE/CHANNEL to delete all the characters.
• If a name is not required, go to step 5.
5 Press SELECT.
“
Store Number” is displayed. The cursor
flashes indicating that the display is ready for the
number to be entered.
6 Use the keypad,
*
/
t
/TONE, #/
s
, or
REDIAL/PAUSE keys to enter the phone number.
The phone number can be up to 20 digits.
• Use the
REDIAL/PAUSE key to enter pause in
the dialing sequence. The display shows a “
P”.
Note
The pause feature is useful for long distance calling, credit card dialing, or
sequences that require a pause between digits.
• Use the
DELETE/CHANNEL key to delete digits as needed.
7 Press SELECT.
The handset beeps and displays the confirmation screen.
The memory storage is complete.
For example if you store a name and number into
memory location number 7, the display shows
“Memory 7 Stored”.
After about 2 seconds, “Memory Store”
is displayed.
Memory Storing
(continued)
MPH6935_OM Eng 3/12/02 3:07 PM Page 19