Filter
Top Products
22
Message Waiting Lamp
The 9002MWD supports a low-voltage LED
message waiting lamp or 90VDC neon.
To turn ON, slide the switch to the “LED” or
“NEON” position. The switch is located
underneath the overlay and faceplate on the top
of the base.
Note: The 9002MWD is factory preset to
the “Neon” setting.
*NOTE: The Caller ID feature and Voice
Mail will ONLY operate if you subscribe
to your local telephone company and/or if
your PBX telephone system is equipped
with this technology. These telephone
features will not work unless you are a
subscriber.
If you are uncertain whether your PBX
telephone system can transfer Caller ID
data, contact your telephone service pro-
vider or your PBX Service Company.
!