Filter
Top Products
8
To cancel Send All Calls
1 While on-hook, press softkey below SAC
(for display users)
or Press
or Dial Send All Calls cancel code _______.
NOTE: All 8405B and 8405D sets have a one-way
speaker only. If you have an 8405B Plus or an 8405D
Plus, your voice terminal may be set for the Speaker
or the Speakerphone feature. Check with your system
manager.
To place/answer a call without lifting the handset,
or to use the speaker with any listen-only feature
1 Press .
2 Place the call or access the selected feature.
3 Adjust the speaker volume if necessary:
To raise the volume, press the right half of the Vol-
ume control button labeled ; to lower the vol-
ume, press the left half of the Volume control
button labeled .
4 Pick up the handset to talk to the other party.
To change from the speaker to the handset
1 Pick up the handset and talk.
To change from the handset to the speaker
1 While the handset is off-hook, press .
2 Hang up the handset.
To end a call using the speaker
1 Press .
NOTE: To use this feature, you must be using an
8405B Plus or 8405D Plus and your voice terminal
must be set for the Speakerphone (speak and listen)
feature.
To place/answer a call without lifting the handset,
or to use speakerphone with any feature
1 Press .
2 Place or answer call, or access selected feature.
SPEAKER
SPEAKERPHONE
Send Calls
Speaker
Speaker
Speaker
Speaker
8405.qref.def3 Page 8 Monday, August 17, 1998 9:07 AM