Filter
Top Products
7
To adjust the speakerphone to the surrounding
room acoustics
1 While on-hook, press and then press
.
• You hear a series of tones.
To select a personalized ring
1 If your 8405 has a button, press and
then press ;
if your 8405 has a button, press .
• Current ringing pattern plays.
2 To cycle through all eight ring patterns:
if your 8405 has a button, continue to
press (and then release) to hear each
subsequent pattern;
if your 8405 has a button, continue to
press (and then release) to hear each new
pattern.
NOTE: If your 8405 has a display, you can also press
or to cycle through the eight ringing
patterns.
3 To set your selected ringing pattern:
if your 8405 has a button, press when
you hear the desired ringing pattern;
if your 8405 has a button, do not press
anymore. You will hear the selected ringing
pattern two more times, and then it will be
automatically saved.
• You hear confirmation tone.
To adjust ringer volume if necessary (speaker is
not
active)
1 To raise the volume, press the right half of the
Volume control button labeled ; to lower the
volume, press the left half of the Volume control
button labeled .
To send all calls (except priority calls) to coverage
1 While on-hook, press softkey below SAC
(for display users)
or Press
or Dial Send All Calls access code _______.
SELECT RING (and RINGER VOLUME)
SEND ALL CALLS
Shift
Speaker
Shift Shift
Hold
Ring Ring
Shift
Hold
Ring
Ring
Next
Prev
Shift Shift
Ring
Ring
Send Calls
8405.qref.def3 Page 7 Monday, August 17, 1998 9:07 AM