Filter
Top Products
13
System Options (Continued)
Speaker Tone on Relay Channel “A” Activation
The factory setting will not cause the speaker to sound a tone when access is
granted with Relay Channel “A”. The tone can be turned on if desired.
1. If not already in Programming Mode, connect by telephone or use the
local keypad. Enter the master password and access programming.
2. Press
3. Select the option for relay activation tone:
• Enter 0 to turn OFF the relay activation tone.
• Enter 1 to turn ON the relay activation tone.
4. Press
5. Exit Programming Mode if all programming is complete.
Maximum Visitor Talk Time
Visitors will converse with residents over the telephone until the resident grants
or denies access. If the resident responds to the visitor’s request by pressing
their telephone keys the system will hang up and release the telephone line. If for
some reason the resident does not press the telephone keys or does not hang
up, the system will automatically disconnect the visitor after 60 seconds. The
disconnect time can be adjusted from 15-255 seconds.
1. If not already in Programming Mode, connect by telephone or use the local
keypad. Enter the master password and access programming.
2. Press
3. Enter the disconnect time in seconds (15-255):
4. Press
5. Exit Programming Mode if all programming is complete.
Directory List Start Position
Although the directory is always sorted and displayed to visitors alphabetically,
the initial directory entry displayed when # is pressed can be set to either the
fi rst directory entry or the directory entry in the middle of all directory entries,
alphabetically.
1. If not already in Programming Mode, connect by telephone or use the
local keypad. Enter the master password and access programming.
2. Press
3. Select the option for the directory list start position.
• Enter 0 to start at the fi rst directory list
• Enter 1 to start in the middle of the directory list
4. Press
5. Exit Programming Mode if all programming is complete.
PPN 63
63#TONE#
TONE = 0 FOR RELAY TONE OFF
TONE = 1 FOR RELAY TONE ON
SPEAKER TONE ON RELAY "A"
FACTORY SETTING: RELAY TONE OFF
PPN 64
64#TIME#
TIME = TIME UNTIL AUTO-DISCONNECT
(15-255 SECONDS)
MAXIMUM VISITOR TALK TIME
FACTORY SETTING: 60 SECONDS
PPN 65
65#POS#
POS = 0 to show first directory entry
POS = 1 to show the middle directory entry
DIRECTORY LIST START POSITION
FACTORY SETTING: 1 (SHOW MIDDLE DIRECTORY ENTRY)