Filter
Top Products
User Programming
7004N/D User Guide | User Programming 25
Storing information under a flexible button
There are two flexible buttons that can be programmed as line, extension, feature or speed
dial buttons.
To assign a feature to a flexible button follow the instructions below:
1. Press the [TRANS/PGM] button and select the flexible button you wish to assign.
2. You may then assign the button in on of the following ways:
a. Press the [TRANS/PGM] button again followed by a user programming code.
b. Press the [SPEED] button followed a speed dial number.
c. Enter the relevant extension number.
3. Press the button.
Note: Users do not have permission to over write a flexible key that is assigned as a
line key.
See page 56 for details of all user programming codes.