Filter
Top Products
IB-PH559(9803F)-WM-E-090103
TELEPHONE FEATURES
Memory Dialing
You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10
two-touch speed dial memories.
STORING PHONE NUMBER INTO MEMORY
1. Press the STORE button. (short for programming) appears on the display.
2. Dial the phone number you want to store. You can store up to 22 digits (including a
TONE ( ) and a PAUSE
(
REDIAL/PAUSE
), each of which is counted as one digit).
NOTE
When the batteries are dead or removed for more than five minutes, the stored
numbers may be erased.
TIP 1: If you entered a wrong number, you may press the STORE button, then start from
the beginning.
To store a number to be dialed via Private Branch Exchange (PABX)
Before entering a phone number in Step 2 in Storing phone number into memory, do as
follows:
1. Enter the outside line access digit (e.g., 9).
2. Press REDIAL/PAUSE button (for a pause).
To check the stored number
While the handset is on the base, press the desired one-touch speed dial button, or press
the AUTO button and the desired two-touch memory number (0 to 9).
The stored number appears on the display for 3 seconds.
To change a stored number
Just store a new number, as described above, the old number will be erased automatically.
MAKING CALLS WITH 3 ONE-TOUCH SPEED DIALING
BUTTONS
1. Pick up the handset or press the SPEAKER button.
2. Press one of the one-touch speed dial buttons (M1 to M3).
3. The phone will dial the numbers you stored into it.
3. For 3 one-touch dialing: For 10 two-touch dialing:
Press one of the 3 one-touch
speed dial buttons (M1 to M3).
4. The stored number and the location will be shown in the display.
5. Press the STORE button or wait 3 seconds to resume normal display.
6. Repeat steps 1 to 5 to store numbers into other memory locations.
10
Press AUTO button, and then press one of the
dialing keys (0 to 9) to store a phone number in.
MAKING CALLS WITH 10 TWO-TOUCH SPEED DIALING
LOCATIONS
1. Pick up the handset or press the SPEAKERPHONE button.
2. Press the AUTO button first.
3. Press the desired two-touch memory number (0 to 9).
TIP 2: If you want to store a calling card number into one of your memories, you may do this
the same way you program a phone number into memory. Also if you need a pause
in the number, simply press the REDIAL/PAUSE button on your phone.