Filter
Top Products
IB-PH5562-WM-E-010807
4
SETTING UP LCD CONTRAST, LANGUAGE, AREA CODE, TIME AND DATE
You may need to set up the LCD contrast level, language, area code, time and date for your
telephone when you power your phone for the first time or when you move to an area that
has a different area code. Area code setting is necessary because the phone must distinguish
local or long distance calls to properly dial calls from the Caller ID list.
Press and hold the DELETE button down, then press the DOWN button, the following will
show in the display (FIG. 1). Release the DELETE button, press the UP or DOWN button to
choose the LCD contrast level (1-5). Press the DELETE button to confirm and accept. In
general, you can press the DISPLAY button directly to set the LCD contrast. Then the
display will come to the language setting.
FIG. 1FIG. 2FIG. 3
ATTACHING THE BRACKET FOR DESK USE
1.Arrange the bracket on the correct position of the bottom
of the base, please note the arrow on the bracket.
2.Insert the two lower tabs on the bracket into the corresponding
slots on the bottom of the base.
3.Push the two upper tabs on the bracket to insert them into
the corresponding slots on the bottom of the base.
4.To separate the bracket from the base, push the two upper
tabs on the bracket and pull the bracket out.
The plastic bracket should be installed correctly for proper
desk use.
CONNECTING THE TELEPHONE
WALL JACK
HANDSET
REAR OF THE
TELEPHONE
The default language “E” (“E” = English; “F” = French; “S” = Spanish) will flash (FIG. 2).
Press the UP or DOWN button to choose your desired language (flashing). Press the
DELETE button to confirm and accept.
IB-PH5562-WM-E-010807.pmd1/23/2007, 5:08 PM5
PDF created with pdfFactory Pro trial version www.pdffactory.com