Filter
Top Products
WALL MOUNTING
1. HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must be
adjusted so it will hold the HANDSET.
A. SLIDE OUT B. REVERSE C. REPLACE INTO PHONE
FOR WALL USE, PUT ADAPTOR HERE
Your PH-549 can be mounted on a wall phone plate. If you do not have a modular wall
phone plate installed, please consult with your phone company or installer to get one, or
see next page for installation without a wall plate.
2. To use as a wall phone, you must use the
plastic (box shape) WALL MOUNT ADAPTOR.
3. Use the SHORT STRAIGHT WALL CORD,
and plug one end into the rear of the
phone. Route the cord into the channel at
the phone bottom.
4. Plug the other end of the SHORT
STRAIGHT WALL CORD into the WALL
JACK.
5. Put the phone over the WALL PLATE,
make sure both posts fit into slots on the
back of the phone. Then slide the phone
down to lock the phone onto the WALL
PLATE.
13
PH-549042100RTTv.2 E