Filter
Top Products
6
english
JABRA BT4010
3. Your phone will nd the Jabra BT4010.
Your phone then asks if you want to pair with it. Accept by
pressing ‘Yes’ or ‘OK’ on the phone and conrm with the
passkey or PIN = 0000 (4 zeros). Your phone will conrm when
pairing is complete.
In case of unsuccessful pairing, repeat steps 1 to 3.
Manual pairing
You can manually put your Jabra BT4010 into pairing mode, if you
want to pair with a second phone or Bluetooth device:
1. Make sure the headset is o.
2. Press and hold the answer / end button for approx 5 sec. until
the Bluetooth indicator on the LCD display starts ashing.
3. Set your Bluetooth phone to discover your headset as
described above.
Wearing sTyle
The Jabra BT4010 ready to be worn without an earhook – simply
insert it into your right or left ear with the headset pointing
towards your mouth. If you prefer to use the earhook, click it on as
shown in the illustration.
For optimal performance, wear the Jabra BT4010 and your mobile
phone on the same side of your body or within line of sight .
In general, you will get better performance when there are no
obstructions between your headset and your mobile phone.