Filter
Top Products
29
NE
To adjust clock:
1. On the numeric keypad, press
0...9
to enter the clock time sequentially from left
(hours) to right (minutes) using
/ .
2. Press # to toggle between AM / PM if the
time format is 12-hour format.
To set the alarm:
1. Use
/ to select between alarm On / Off. If the alarm is set to “Off”,
the display returns to the previous menu. If the alarm is set to “On”, the
display shows the alarm time as a clock setting.
2. Follow the same steps as entering the clock time to enter the alarm time.
When the alarm sounds, press any key to stop the alarm from ringing.
To adjust the time display format:
1. Use
/ to toggle between 12 / 24 hour formats and press MENU
to confirm selection. Then enter the MM/DD format (month / date). The
selected MM/DD format is displayed.
2. Use
/ to toggle between Month-Date display formats.
NOTE
This format will also change the day and date format in the Caller ID
screen.