Krown Manufacturing KR2812 Amplified Phone User Manual


 
24
EN
It is possible to change the number format in the call log before storing the
name / number . While viewing the Caller ID list, press Format to change
the number format . The available number formats depend on the received
number. The table below shows the possible selections and the order in
which they appear. The number format is changed by truncating or by
adding the digits.
INCOMING NUMBER ACTION ONSCREEN DISPLAY
Area code is available,
number contains 7-digits
Format changes from 7-digits -->
10-digits --> 11-digits, then
returns to 7-digits
yyy-yyyy --> xxx-yyy-yyyy -->
1-xxx-yyy-yyy where y is the
number, x is the area code
Area code is available / not
available, number contains
10-digits
Format change from 10-digits-->
11-digits --> 7-digits, then returns
to 10-digits
yyy-yyy-yyyy --> 1-yyy-yyy-
yyyy --> yyy-yyyy where y is
the number
Area code is available / not
available, number contains
11-digits with rst digit “1”
Format changes from 11-digits-->
7-digits -->10-digits, then returns
to 11-digits
1-yyy-yyy-yyyy --> yyy-yyyy
--> yyy-yyy-yyyy where y is the
number
When reviewing the call log, press MENU to enter the call log menu and
select the sub-menu item “EDIT TO CALL”. Edit the number using 0…9 OR
press DEL to quit the operation. The call log number is transferred to pre-
dial mode. The number can be edited before dialing in pre-dial mode.
NOTE: During an incoming call, the name that appears on the screen may
either be available from the phone network or from information previously
stored in the phonebook. If the Caller ID data contains the caller’s name
information, it will be displayed. If the calling number matches a number in
the phonebook, the name associated with this number is shown instead.
The phonebook name takes precedence.
1. When reviewing a call log, press
MENU to enter the call log menu and
select the sub-menu item “DELETE RECORD”.
2. “DELETE?” appears onscreen. Use
MENU to conrm deletion of the
selected Caller ID record OR press any other key to cancel the operation
and return to call log review.
CHANGING THE CALLER ID NUMBER FORMAT
EDIT THE CALL LOG NUMBER BEFORE DIALING
ERASING A CALLER ID RECORD