Filter
Top Products
10
ADJUSTING THE SPEAKER VOLUME
Adjust the speaker volume using the buttons and .
PLACING CALLS ON TEMPORARY HOLD
Mute
Press (Mute) to turn off the microphone.
The LEDs change from blue to red. The other party cannot hear what you are saying.
Press (Mute) to reconnect the call.
Hold
Press HOLD to put the call on hold.
The LEDs change from blue to ashing red. Both the microphone and the speaker are turned off
and the call is on hold.
Press HOLD to reconnect the call.
ENDING CALLS
End the call by pressing .
SECURE CONNECTION
The Konftel 300IP supports secure data connections between devices (authentication and
encryption). This feature must be activated by the administrator.
You know the feature is activated if you see a closed padlock in the lower right-hand
corner of the display screen when the Konftel 300IP has a secure connection to the other
phone. If the phone or PBX you are calling does not support secure connections, you will
see an open padlock on the screen. See the illustration on page 5.
DURING A CALL