Filter
Top Products
- 11 -
c) Adjusting the receiver volume
1*
Using the slider on the receiver, you
can adjust the receiver volume. There
are two levels (MIN / MAX) available
here.
y
With the receiver on the hook press
the button , to set the ringing
volume to one of four levels.
d) Call waiting and transferring
You can put your incoming or out-going
calls on call waiting mode, for example,
for enquiries or transferring a call to ot-
her users of PABX.
If your service provider or your PABX
supports this function:
u
Press the button R, to put a call on
call waiting mode.
u
Press the button R again to return
from the call waiting to the present
caller.
• You can simply put down the receiver
when the caller to whom you wish to
transfer the waiting call, acknowled-
ges the call.
If your service provider does not support
such a function and your phone is also
not connected to a PABX:
g
Press the button, if you wish to
put the caller on an internal waiting
line of your telephones on waiting.
Your caller will be presented with
music while on hold, till you decide
to press the button.
t
Press the buttons, to select
from amonng the 16 tunes, while the
music is being played. A call waiting li-
ne without music is the mute function.
Here too the call is kept on waiting:
i
Press the button, if you wish to
disable or enable the microphone
during a call.
In this, you can hear the caller but
he cannot hear you.
e) Making a phone call
To make outgoing calls,...
• Pick up the receiver and dial the
number or
a
Press the button when the recei-
ver is on the hook. With this the
hands-free mode is enabled. During
the hands-free mode you can pick up
the receiver and continue speaking.
• You can also dial the number first
and then pick up the receiver or
press the button. The number
is dialled automatically.
f) Dialling with Local Code
To dial a call number from the memory
with prefixed Local Code, first the requi-
red number must be displayed.
2^
For example, press the button
and search for the desired number in
the Phone Book (see also Section 9n).
s
Press the button twice. Instantly,
the call number will be dialled along
with the prefixed Local Code.
e-bench KH 5001
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 11