Filter
Top Products
TK-2160
5
DISASSEMBLY FOR REPAIR
/
/
Ω
≈
,
Packing
1. Separating the case assembly from the chassis.
1. Remove the volume knob
z
.
2. Remove the two screws
x
.
3. Lift the chassis
c
,
and remove it from the case assembly.
Note: After separating the case assembly from the chassis,
remove the channel knob.
2. Separating the chassis from the TX/RX unit.
1. Remove the two screws
v
fixing the TX/RX unit B/2.
2. Remove the twelve screws
b
and two screws
n
fixing
the TX/RX unit A/2.
3. Remove the solder from the antenna terminal using a
soldering iron
m
, then lift the unit off.
z
x
x
c
Channel knob
≈
m
,
.
v
v
b
b
b
b
b
b
b
n
TX/RX UNIT B/2
TX/RX UNIT A/2
3. How to remove the battery terminal block.
1. Remove the two screws /, then pull out the back cover Ω.
2. Remove the screw
≈.
Note: To remove the TX/RX unit B/2, remove the solder using
a soldering iron
.
.
Note: The two screws
n
of TX/RX unit A/2 are fixing the
battery terminal block
,
.