Jwin JT-P560 Telephone User Manual


  Open as PDF
of 5
 
REVIEW DIALED CALLS
1. Use [DIALED] to review the last dial out record, and
2. Press [DIALED] repeatedly to review all records.
3. Use [DEL] to delete a dialed call record.
PHONE BOOK REVIEW AND DIAL OUT
1. Press [BOOK] to go to the phone book.
2. Use [UP], [DOWN] to review and select records, or
3. Enter the first letter of the record by pressing the corresponding key. You can
press the same key continuously to go through a range beginning with the same
letter.
4. Press [RD/BACK] to dial a number after the record is located.
AUTO REDIAL
When a dialed number is busy:
1. Press [AUTO-RD] to activate auto-redial function. The phone will repeat dial the
last dialed number 5 times. When the call gets through:
2. Press [SPEAKER] or lift the handset to converse.
MUSIC HOLD
This feature is automatic. When you are conversing with someone by phone and you
need to put them on HOLD:
- Press [HOLD] to start music hold.
- Resume your conversation by picking up the handset or pressing
[SPEAKER].When you resume your conversation the music will stop.
DIGITAL LOCK
Use this function to block specific numbers from being dialed on your phone.
To Activate Lock Function
1. Press [CODE] to enter lock manual. “INPUT PIN CODE” will display on the
LCD.
2. Enter “8888” (the preset PIN code) and press [CODE] again. “UPDATE DATE
CODELOCK” will display on the LCD.
3. Enter the desired digits you would like to block. Use “#” to separate the numbers,
if necessary.
4. Press [CODE] to confirm and complete.
5. NOTE: If you would like to block all digits, enter “#**” and press [CODE] to
confirm.
To Deactivate the Lock Function
1. Press [CODE] to enter the manual lock function. The LCD will display “INPUT
PIN CODE”.
2. Enter “8888” (the preset PIN code) and press [CODE] again. The LCD will
display “UPDATE DATE CODELOCK”.
3. Press [ DEL] to erase the locked digits.
4. Press [CODE] to confirm.
 previous