Filter
Top Products
INSTALLATION
1. Insert 3 “AAA” batteries.
2. Connect the phone with the telephone line.
3. Press [SET] to enter setup mode, then:
- Use [UP], [DOWN] to select options.
- Use [SET] to enter.
- Use [DEL] to exit.
SELECT LANGUAGE
1. Press [SET] to enter.
2. Use [UP], [DOWN] to select language options.
3. Use [SET] to confirm.
SET AREA CODE
1. Press [SET] to enter.
2. Use [UP], [DOWN] to select a number.
3. Use [SET] to confirm.
4. Repeat steps 2 and 3 to select each number.
LONG DISTANCE ACCESS
1. Press [SET] to enter.
2. Use [UP], [DOWN] to select the number.
3. Use [SET] to confirm.
4. Repeat steps 2 and 3 to select each number.
DATE/TIME
1. Press [SET] to enter.
2. Use [UP], [DOWN] to select the year.
3. Use [SET] to confirm.
4. Repeat to select the time.
LCD CONTRAST ADJUST
1. Press [SET] to enter.
2. Use [UP], [DOWN] to select the desired contrast level.
3. Use [SET] to confirm.
BABY CALL
1. Press [SET] to enter.
2. Use [UP], [DOWN] to turn the baby function on/off.
3. When you turn the function on, enter the emergency call number on the dial
keypad.
NOTE: Once this is set up, press any key on the keypad (except [SET]) and the preset
number will dial out under speakerphone mode.