Jwin JT-P560 Telephone User Manual


 
SET RINGING MELODY
1. Press [SET] to enter.
2. Use [UP], [DOWN] to select the desired ringing melody.
3. Press [SET] to confirm.
PHONE BOOK ENTRY
1. Press [SET] to enter.
2. Enter Number by using the dialing keypad.
3. Press [SET] to confirm.
4. Enter the name by pressing the key which corresponds to the desired letter several
times until the wanted letter appears.
5. Wait 2 seconds before entering the next letter.
6. Press [SET] to complete.
PHONE BOOK EDIT
1. Press [SET] to enter.
2. Enter the first letter of the record’s name by pressing the key which corresponds
to the desired letter several times until the wanted letter shows on the LCD.
3. Use [UP], [DOWN] to search for the wanted record.
4. Use [DEL] to erase an unwanted phone number.
5. Re-enter a new phone number.
6. Use [SET] to confirm changes and the cursor will move to the Name position.
7. Use [UP], [DOWN] to move the cursor.
8. Use [DEL] to erase letters.
9. Use the keypad to enter new letters.
NOTE: Use the “0” key to insert a blank space during entry.
OPERATION
MAKING A CALL
1. Lift the handset or press [SPEAKER]. You should get a dial tone.
2. Enter the phone number you wish to call.
3. You can use [DEL] to correct the number, then
4. Press [SPEAKER] or [RD/BACK] to dial the number.
REVIEW INCOMING CALLS AND DIAL BACK
1. Use [UP], [DOWN] to review and select incoming call records.
2. Press [RD/BACK] to dial the number.
SAVE INCOMING CALLS TO THE PHONEBOOK
1. Use [UP], [DOWN] to review and select from the list of incoming call records.
2. Press [STORE].
3. Press [BOOK] to save the record in the phone book.
DELETE INCOMINGL CALLS
1. Use [UP], [DOWN] to review and select the incoming call records.
2. Press [DEL] to erase a single record.
NOTE: Holding [DEL] for more than 4 seconds will delete the entire incoming call
record list.