Filter
Top Products
1
Product specifi cations
Model BHS-702
Size 60 x 28 x 11 mm
Weight 20 g
Talk time Up to 9 hours
Music time Up to 7 hours
Standby time Up to 150 hours
Charging time Within 2 hours
Battery type Rechargeable battery with
2.0mm DC jack
Bluetooth Standard Bluetooth 2.0 EDR
Supported BT profi les Handsfree (HFP)1.5 and
Headset (HSP)1.1
Paired devices Up to 8, one at a time
Operating Distance 10 meters
Operating temperature range -10°C to +60°C
Storage temperature range -40°C to +85°C
Iqua Pendant
Bluetooth Wireless headset BHS-702
User Guide
Owerview of the product
1. Multifunction button
Handling call functions
2. Indicator Light
Status indication with yellow light
3. Charger connector
4. Earpieces
5. Volume + button
6. Volume - button
7. Microphone
8. How-to-wear the headset
Your Iqua BHS-702 is designed to be comfortably worn around your neck with the
earphone wire, just like wear a necklace. The performance of the device overall is
most optimal when the headset is raised to the highest position, closest to the mouth
Sales package contents
a. Headset
b. Wall charger
c. 3 pairs of Earplug (1 pair is on headset)
d. User guide
Getting started
Charging the battery
Before using BHS-702, you must charge it for approximately 2 hours. When the battery
is fully charged, it provides up to 9 hours of talk time and up to 150 hours of standby
time. Always use the charger provided in the sales package.
1. Connect the charger cable to BHS-702.
2. Plug the charger into a wall socket. The yellow light will turn on.
3. When the battery is fully charged, the yellow light will turn off.
Switching on and off
To switch on the BHS-702
When the headset is powered off, press the Multifunction -button until the yellow light
starts fl ash.
To switch off the BHS-702
When the headset is powered on, press the Multifunction -button until the yellow light
fl ashes twice and then turns off.
Pairing the Bluetooth headset to a Bluetooth mobile phone
Pairing is the process for linking BHS-702 with your Bluetooth enabled mobile phone.
After this process is completed, you can use the BHS-702 with the paired mobile phone.
If you want to use the BHS-702 with another mobile phone, you must repeat the pairing
process. Even though BHS-702 can be paired with up to 8 compatible phones it can only
be connected to one phone at a time. Once it is paired with 8 phones, the 9th paired
device will replace the 1st paired device.
1. When the headset is powered off, press and hold the Multifunction -button until the
yellow light starts fl ashing rapidly.
2. Release the button. BHS-702 is now in pairing mode, waiting for your mobile phone to
contact it.
3. Complete the pairing with your mobile phone. Please refer your mobile phone manual
for details on how to search and pair. When phone has found the headset, it will show
Iqua Pendant on its screen. In order to pair with the phone, enter the PIN code 0000.
4. After pairing, BHS-702 will automatically connect to your mobile phone. After pairing,
some phones do not automatically connect to the headset. If this is the case, please
ensure that you connect the phone to the headset (please refer to your mobile phone
manual). Once pairing and connection are completed, the yellow light starts fl ashing.
* For latest compatibility information please visit www.iqua.com
Disconnecting BHS-702 and your phone
Easiest way to disconnect BHS-702 and your phone is simply switch off the BHS-702.
Reconnecting the paired headset to a compatible phone
To reconnect the BHS-702 to the last connected phone, simply switch on the headset
and it will automatically connect to your phone. Otherwise, make the connection in the
phone menu as instructed in the user guide of the phone. If it can’t be reconnected then
press and hold Vol+ button to reconnect.
Call Functions
Answer a call
When you receive a call, you hear a ringing tone through the headset. Press the
Multifunction -button briefl y to answer the incoming call. You will hear a tone once the
call is answered.
End a call
To end an active call, press the Multifunction -button. You will hear a tone when the call
is ended.
Reject a call
When you receive an incoming call that you do not want to answer, simply press the
Multifunction-button until you hear a sound and call is rejected.
Redial the last dialed number
To place a call to the last dialed number, press the Vol+ button when no call is in
progress. You will hear a high tone. Please note some phone models do not support
redial. With some phone models, press the Vol + button again to dial the number
displayed on the phone.
Voice dialing (when supported by the phone)
To activate a voice dialing feature of your phone, press the Vol- button when there is
no call in active. You can hear a high tone. This will indicate that you can start saying
the voice tag. Refer to the mobile phone manual for details. Please note, some phone
models do not support voice dialing.
Call Waiting
If a new call comes in during another call you want to answer, you can hold the current
call and answer to incoming call by pressing the multifunction- button briefl y. You will
hear a sound when the new call is answered. When you want to end the new call and
switch back to the fi rst call press the Multifunction-button until the call is transferred.
Call Transferring(supported depends on the mobile phone)
To transfer an active call from the BHS-702 to your mobile phone, press the Vol+ button
until the call is transferred to your phone. To transfer an active call from your mobile
phone to the BHS-702, press the Vol+ button or use the functions of your phone as
instructed in its user guide.
Adjusting volume
Press the Vol+ button briefl y to increase the volume. Press the Vol- button briefl y to
decrease the volume.
Mute setting
You can mute the BHS-702 during an ongoing call by pressing the Vol- button until you
hear a voice tone. You can unmute the call by pressing the Vol- button.
Reset Hardware
In case the headset is jammed you may do hardware reset and restart the headset.
Briefl y press Multifunction button and Vol+ buttons simultaneously. The headset will be
powered off(light turns off) once the hardware is reset.
Erase Paired Devices
The BHS-702 can be paired with up to 8 Bluetooth devices, if you want to pair it with
more devices, you need to erase the paired device information. To reset the pairing list to
BHS-702, press and hold both Vol+ and Vol- buttons simultaneously.
Music functions (supported depends on the mobile phone)
Start Play
Make sure your headset is connected in A2DP (Advanced Audio Distribution Profi le).
While listening to music, simply press Multifunction-button briefl y to play the music.
Pause
While listening the music, press Multifunction-button briefl y to pause the music.
Skip one track forward
While listening the music, press the Vol+ button to change to the next song.
Skip one track back
While listening the music, press the Vol- button to change to the previous song.
Stop play
Press the multifunction button until the music stopped.
Light indication summary
The BHS-702’s LED light is yellow and usually accompanied by a sound signal.
Power on but no Bluetooth connection Yellow light fl ashes rapidly
Bluetooth connection on Yellow light fl ashes slowly
Pairing mode Yellow light fl ashes continuously
Battery low Yellow light fl ashes four times and a low
tone is played
Battery charging Yellow light is on continuously in the power
off condition
Power management
This product is powered by a built-in rechargeable battery which can not be changed. Do
not attempt to replace the battery. Rechargeable battery can be charged and discharged
hundreds of times, but it will eventually wear out. After a period of time that will vary
depending on the use and usage conditions you may fi nd that the built-in battery will
power your product for only a couple of hours requiring you to charge more frequently.
Do charge your device only with the charger provided in the sales package. Unplug the
charger when not in use. Do not leave the device connected to the charger for longer
period than needed, since overcharging may shorten the battery lifetime.
If left unused a fully charged battery will discharge itself over time.
Temperature extremes may affect the ability of the battery to charge. Always try to keep
the device between 15 °C and 25 °C (59 °F and 77 °F). Leaving the device in hot or cold
places such as in closed car in summer or winter conditions will reduce the capacity
and lifetime of the battery. A device with hot or cold battery may not work for a while
even when the battery is fully charged. Battery performance is particularly limited in
temperatures well below freezing. Do not charge in humid environment.
Care and Maintenance
– Do not expose the device to liquid, moisture or humidity as it is not
waterproof.
– Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
– Do not store the device in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
– Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
– Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards and fi ne mechanics.
– Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the device.
– Use a soft, clean, dry cloth to clean any lenses.
– Do not expose your device to contact with sharp objects as this will cause
a
b
d
c
8