Filter
Top Products
[ 38 ] ADDITIONAL INFORMATION
Register the Security Code
1) Unplug the AC adapter.
2) Press and hold
find handset on the base while you plug in the AC Adapter, hold
find handset until the status LED on the base flashes.
3) Press
talk/flash. “Handset Registering” appears.
When the operation is finished “
Registration Complete” appears and the status
LED is turned Off. You will hear a confirmation tone and the phone returns to the
standby mode.
• You must complete the registration operation within 30 seconds, or the phone returns to the standby mode.
• During the registration operation, you cannot receive an incoming call, page, or make a call.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
Your phone may be used with an optional headset, the Inter-Tel HS910.
To use this feature, insert the headset plug into the headset jack. Your
phone is ready for hands-free conversations. (Headset may be purchased
by calling the Inter-Tel Parts Department or visiting the web site.
See page 9.)
Headset Installation
INT1100 Manual-5.0.qxd 1/29/04 12:09 AM Page 38 Bob's Garage: New Backup: Clients:CoastlineCreative:Clients:Int