Filter
Top Products
[ 9 ]
GETTING STARTED
GETTING STARTED
B. Install the battery pack
Charge the battery pack for at least 15-20 hours before
plugging the phone line into your base unit.
1) Press down on the battery cover release and slide the cover
down until it comes off.
2) Connect the battery pack connector observing the correct
polarity (black and red wires) to the jack inside the battery
compartment.
Do not exert any force on this connection. It could cause
damage to the battery or to the handset. The plastic
connectors will fit together in only one way. Once you are
certain that you have made a good connection, then insert
the battery pack into the battery compartment.
Do not pinch the wires.
3) Securely close the battery compartment cover by sliding it
up until it snaps into place.
4) Place the handset in the base with the keypad facing
forward.
• Use only the Inter-Tel
battery (BT-446)
supplied with your
phone.
Replacement
batteries are also
available through
Inside Sales.
• Recharge your phone on
a regular basis by
returning the handset to
the base after each
phone call.
INT1100 Manual-5.0.qxd 1/29/04 12:09 AM Page 9 Bob's Garage: New Backup: Clients:CoastlineCreative:Clients:Inte