Filter
Top Products
23
CAUTION: Keep the radio and microphone handset at least 3.3 feet (1 meter) away from
any magnetic devices on your boat (such as a compass).
To install the base station using the recessed mounting kit:
1. Tape the Recessed Mounting installation template onto the chosen mounting
location.
CAUTION: If your dash exceeds 3/5" (15 mm) in thickness, you will not be able to recess
mount the radio. Use the previous procedure for gimbal mounting the radio instead.
CAUTION: Before drilling or cutting into the dash, make sure that there is nothing behind the
mounting surface that might be damaged by performing these procedures.
2. Drill a saw blade entry hole, as indicated on the mounting template.
3. Cut out the area inside the dashed line.
4. Remove the installation template and slide the radio into the cavity.
Radio Base Station
Mounting Screws
Dash
Gimbal
Mounting
Knobs
Gimbal
Mounting
Bracket