Filter
Top Products
PAGE 11 of 14
MODEL TI984 TELEPHONE INTERFACE 42004-071F
f:\standard ioms - current release\42004 instr. manuals\42004-071f.doc
05/03
Programming Table
Function RESET UNIT TO FACTORY CODES (DEFAULT)
KEY SEQUENCE # #
DESCRIPTION
(Day Mode)
Voice access method (for incoming calls)
7-second voice page
60 seconds after the page for the call to be answered before disconnection
Auto-connect enabled
4 incoming rings before TI984 enters page mode
7 second hang up delay
Internal Day/Night switch
DESCRIPTION
(Night Mode)
Ring access method (for incoming calls)
1 incoming ring before TI984 generates a ring tone on the page line
7 second hang up delay
Internal Day/Night switch
*Function SELECT INCOMING CALL - MANUAL ACCESS METHOD
KEY SEQUENCE # 3 3
DESCRIPTION
If selected, a switchboard operator must manually connect the telephone call to the
Page/Party
®
system by pressing the ACCESS button on the front cover of the TI984.
The incoming call is automatically transferred to the designated party line, provided
a station is off-hook on the designated party line.
*Function SELECT INCOMING CALL - VOICE ACCESS METHOD
KEY SEQUENCE # 3 0 P P M M A
DESCRIPTION If selected, incoming calls are transferred directly to page line.
PP = number of seconds of voice page (00 to 99)
MM = number of seconds after a page that the call must be answered (00 to 99) or
the call is disconnected (auto-connect DISABLED).
With auto-connected ENABLED, the call is transferred directly to the
designated party line after the page, provided the designated party line is in use.
A = auto-connect option: 1 to enable or 0 to disable
Example: To set a 15-second voice page, a 25-second period after the end of the
page before the call reverts to the auto-connect option, and to enable the auto-
connect option, enter the following code: # 3 0 1 5 2 5 1
*Function SELECT INCOMING CALL - RING ACCESS METHOD
KEY SEQUENCE # 3 1
DESCRIPTION If selected, incoming calls are transferred directly to the page line after a
programmed number of rings have elapsed. To answer the call, someone must take
a Page/Party
®
station off-hook on the designated party line.