Filter
Top Products
10
Install and charge the battery
New batteries are partially charged. Before you start using your device, it is recommended that you
install and charge the battery.
To install the battery, remove the battery cover first, and then insert the battery
by aligning the exposed copper part of the battery pack with the protruding
copper conductor which is on the left side of the battery slot. Insert the left
side of the battery first, then gently push the battery into place, and replace the
battery cover.
Some batteries perform best after several full charge/discharge cycles. You can charge the battery
in two ways:
• Connect your device directly to an electrical
outlet using the AC adapter.
• Plug the sync cable to the USB port on
your PC and to the sync connector on your
device.
When your device is turned off, charging is indicated by a solid amber light on the LED indicator.
When your device is turned on, charging is indicated by a solid amber light on the LED indicator as
well as a charging icon ( ) on the Quick Launcher.
After the battery has been fully charged, the LED indicator becomes green and a full battery icon
( ) appears on the Quick Launcher.