Filter
Top Products
To use a modem
1. Pull the Phone Jack Cover to open.
2. Insert Fax Modem Phone Cable to analog telephone line.
3. Connect the Fax Modem Phone Cable to the Phone Jack.
Note 1
You can update the modem using Software modem diskette which is shipped
with the Handheld PC hardware.
Please follow the steps:
1.Start Windows 95 or Windows NT on your desktop computer.
2.Connect Handheld PC to the desktop computer with serial cable.
3.Insert the Software Modem diskette in drive A.
4.In Windows 95/NT, click the Start button, and choose Run.
5.Type A:SETUP and press Enter.
6.Follow instructions displayed by the installation program.
Note 2
The bsquare Fax professional software installed in this equipment does not
support communication rate of 12000 or 14400bps.
Do not connect your modem to a digital telephone line. Modems are designed for
use only with analog telephone lines; connecting to a digital telephone line may
damage the modem. Other PC card modems are more likely to be damaged.
Verify that the line is analog before connecting.
In Canada, do not attempt an automatic redialing with the bsquare Fax
professional software installed in this equipment or any other communications
software by using the phone jack of this equipment. It may harm the telephone
network.
HITACHI will assume no liability for the damage caused by automatic redialing.
Caution
20