Filter
Top Products
10
11
6. Your phone will then ask if you want to pair with it.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and
confirm with the passkey or PIN = 0000 (4 zeros).
Your phone will confirm when pairing is complete.
In case of unsuccessful pairing, repeat steps 1 to 6.
Note: If the pairing cannot be completed within 2
minutes after the pairing mode is activated, the
speakerphone will power off automatically. Please
repeat steps above to pair the speakerphone and
mobile phone again.
How to…
Answer a Call
Press the MFB on your speaker to answer a call.
End a Call
Press the MFB to end an active call.
Make a Call
When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
speaker. If your phone does not allow this feature, press on
the Hisense HB600’s MFB to transfer the call to the speaker.
Reject a Call*
Press the MFB for approximately 2 seconds when the
phone rings to reject an incoming call. Depending on your
phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal.
Activate Voice Dialing*
Press the MFB once. Wait for the beep and then an-
nounce the name you wish to call.
For best results, record the voice-dialing tag through your
speaker. Please consult your phone’s user manual for
more information about using this feature.
Redial Last Number*
Press the MFB twice when the speaker is turned on and
not use (StandBy mode).
Adjust Sound and Volume
During a call, repeatedly press the Volume (+) or Volume
(-) to change the volume.
Call Waiting and Placing a Call on Hold*
This lets you put a call on hold during a conversation and
answer a waiting call.
Press the MFB twice to put the active call on hold and
answer the waiting call.
Press the MFB twice to switch between the two calls.
Tap the MFB to end the active conversation.
Reject Call Waiting
During a conversation, Press the MFB for 2 seconds in
order to reject the call waiting.
Mute Function
During a conversation, press the mute button to mute the
microphone.
To reactivate the microphone, short press the mute button.