Filter
Top Products
8
9
Charging Your Speaker
Make sure that your Hisense HB600 speaker is fully charged
before first use (normal charging time is approximately 3
hours). Use the AC adaptor to charge from a power socket,
or charge directly from you’re your car power outlet using
the charging cable provided After connecting to the power
source, the red LED will flash while charging.
After charging ends the red LED will turn off.
Auto power off
if the speaker is turned on but not connected to a
Bluetooth device for 15 minutes, the speaker will auto-
matically turn off.
GETTING STARTED
The Hisense HB600 is easy to operate.
Turning Your Speaker On and Off
To turn your speaker on, press and hold the MFB for 4
seconds. Release the button when you hear short beep, the
blue light will flash 5 times and the speaker will turned on
To turn off your Speaker, press and hold the MFB for 4
seconds. Release the button when you hear short beep,
the blue light will flash 5 times and the speaker will turned
off.
Pairing with Your Phone or Other Device
Before you use your Hisense HB600, you need to pair it
with your mobile phone.
1. Make sure that the HB600 is turned off
2. Press and hold the MFB for 6 sec. until led flash red
and blue alternatively.
3. Activate Bluetooth function of the mobile phone to
search for Bluetooth devices (please refer to the
phone’s manual);
4. Set your Bluetooth phone to ‘discover’ the Hisense
HB600
Follow your phone’s instruction guide. This usually
involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’
menu on your phone and selecting the option to
‘discover’ or ‘add’ a Bluetooth device.
5. Your phone will find the Hisense HB600