Filter
Top Products
3 - 6 Dolphin® 7900 Series Mobile Computer User’s Guide
Side Panel Features
The following graphic shows the left, side panel.
Programmable Side Button
Programmable buttons are located on both side panels. By default, these buttons activate the image/scan engine as a
more ergonomic alternative to pressing the Scan key on the keyboard. These buttons can be programmed to perform
specific functions in the Buttons setting. For details,
see Buttons on page 7-3.
Access Door
When open, the access door on the Dolphin 7900 contains the mini-SD memory interface.
Opening the Access Door
Note: Access door removal requires a special tool from Hand Held Products, part number 100001024.
1. Press Blue + Backlight key to put the terminal in Suspend Mode; see Suspend Mode on page 2-11.
2. Remove the battery; see page 2-5.
3. Place the terminal on a flat, secure surface with the keyboard face-down.
Mini-SD Interface
You can install a mini-SD card to expand the capacity of the terminal’s storage memory. After
memory expansion is complete, this door should be closed and sealed. 64, 128, and 256 MB
cards are available. (The mini-SD memory interface does not support SDIO.)
Programmable Side Button
Access Door
Mini-SD Interface