Filter
Top Products
FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 24 of 52
CONFIGURATION GUIDE
CONFIGURING THE HT70X THROUGH VOICE PROMPTS
DHCP MODE
Select voice menu option 01 to enable HT70X to use DHCP.
STATIC IP MODE
Select voice menu option 01 to enable HT70X to use STATIC IP mode, then use option 02, 03, 04, 05 to
set up IP address, Subnet Mask, Gateway and DNS server respectively.
FIRMWARE SERVER IP ADDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
CONFIGURATION SERVER IP ADDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
UPGRADE PROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
FIRMWARE UPGRADE MODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) Always check, 2) check when pre/suffix changes, and 3) never upgrade.
CONFIGURING THE HT70X VIA WEB BROWSER
HT70X has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT70X through a web browser such as
Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not
included).