Filter
Top Products
Grandstream Networks, Inc. HT-70X User Manual Page 6 of 35
Firmware Version 1.0.0.18 Last Updated: 03/2012
HT702 HT704
Table 1: Definitions of the HT70X Connectors
DC 12V
Power adapter connection
Internet Port (RJ-45)
Connect to the internal LAN network. (HT701 Only)
LAN Port (RJ-45)
Connect to the internal LAN network. (HT702 and HT704 Only)
RESET
Factory Reset button: Press for 7 seconds to reset factory default settings.
Phone Port(s) (RJ-11)
FXS port: to be connected to analog phones / fax machines.
There are four (4) LED buttons that help you manage the status of your HandyTone 701, and
there are five (5) LED buttons that help you manage the status of your HandyTone 702 and 704.
Table 2: Basic Definitions of the HT70X LEDs Pattern
LEDs
POWER LED
Indicates Power. Remains ON when power is connected
Internet LED
Indicates Access to Internet. Remains ON while there is Access (HT701 and HT702 Only)
Link/Activity LED
Indicates if There is Activity on the Internet Port (HT701 and HT702 Only)
PHONE LED
Indicate status of the respective FXS Ports-PHONE on the back panel
Unregistered – OFF
Registered and Available – ON (Solid Green)
Off-Hook / Busy – Blinking every second
Slow blinking FXS LEDs indicates voicemail
NOTE: All LEDs display green when ON
LAN Port
(RJ-45 connector
10/100 Mbps
with LEDS)
Reset
Power
Supply
(12V;1A)
Phone (RJ-11
FXS Ports)
LAN Port
(RJ-45 connector
10/100 Mbps )
Reset
Power
Supply
(12V;1A)
Phone (RJ-11
FXS Ports)
Display LED’s (green)
Display LED’s (green)