Filter
Top Products
Grandstream Networks, Inc. HT-70X User Manual Page 5 of 35
Firmware Version 1.0.0.18 Last Updated: 03/2012
CONNECT YOUR HT70X
Equipment Packaging
The HT70X ATA package contains:
One HT70X Main Case
One Universal Power Adaptor
One Ethernet Cable
One Vertical Stand (Only on HT702 and HT704 Packages)
Connecting the HT70X
The HT70X is designed for easy configuration and easy installation. Configure the HT70X following the
directions in the Configuration section of this manual.
1. Insert a standard RJ11 telephone cable into the Phone port and connect the other end of the
telephone cable to a standard touch-tone analog telephone.
2. Insert the Ethernet cable into the Internet or LAN port of the HT70X and connect the other end of
the Ethernet cable to an uplink port (a router or a modem, etc.)
3. Insert the power adapter into the HT70X and connect it to a wall outlet.
The HT70X Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total
solution for networks providing VoIP services. The HT70X VoIP features and functions are available using
a regular analog telephone.
Figure 1: Connecting the HT70X
Internet Port
(RJ-45 connector
10/100 Mbps)
Reset
Phone
(RJ-11 FXS Ports)
Power
Supply
(12V;0.5A)
HT-701
Display LEDs
(green)