Grandstream Networks Handy Tone 386 Cordless Telephone User Manual


 
HandyTone-386 User Manual Grandstream Networks, Inc.
26
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2004
Users are recommended to power cycle the HandyTone-386 after seeing the above message.
6.2.5 Rebooting the HandyTone-386 from Remote
The administrator of the HandyTone-386 can remotely reboot the HandyTone ATA by clicking on the
“Reboot” button at the bottom of the configuration page. Once done, the following screen will be
displayed to indicate that rebooting is underway.
Grandstream Device Configuration
The device is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
Click to relogin
All Rights Reserved Grandstream Networks, Inc. 2004
At this point, the user can relogin to the HandyTone-386 after waiting for about 30 seconds.
6.3 Configuration through a Central Server
Grandstream HandyTone ATAs can be automatically configured from a central provisioning system.
When HandyTone ATA boot up, it will send TFTP or HTTP request to download configuration files,
there are two configuration files, one is “cfg.txt” and the other is “cfg000b82xxxxxx”, where