Filter
Top Products
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X DOCUMENT NUMBER
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 10 OF 25
4 BroadWorks Device Identity/Profile
BroadWorks configurable device identify/profile is introduced in BroadWorks Release 14.0.
This section applies only to BroadWorks Release 14.0 and later.
The following table identifies the required BroadWorks device identity/profile settings for
interoperability between the GXW-4004/GXW-4008/HT-502 and BroadWorks. For an
explanation of the profile parameters, refer to the BroadWorks Device Inventory Guide
1.a)i.[4].
For most of the parameters below, an “X” indicates the parameter function is supported
and/or required. If the item is blank, it is not supported.
Grandstream GXW-4004/GXW-4008/HT-502 Identify/Device Profile
Signaling Address Type
Intelligent Proxy Addressing
Number of Lines
GXW-4004: 4 lines
GXW-4008: 8 lines
HT-502: 2 lines
Ringback Tone/ Early Media
Support
Local Ringback – No Early Media
Registration Capable
X
Static Registration Capable
E.164 Capable
Trusted
Authentication Override
Video Capable
RFC 3264 Hold
X
Route Advance
Wireless Integration
PBX Integration
Use Business Trunking Contact
Forwarding Override
Conference Device
Music On Hold Device
Web Based Configuration URL
Auto Configuration Type
2 Config file
Reset Event
checkSync
Enable Monitoring
CPE System File Name
gxwSystem.txt / htSystem.txt
Device File Format
%BWMACADDRES%.txt