Generac 4010 Cordless Telephone User Manual


 
44
Appendix
Gigaset 4010 Classic, GBR, A31008-G4010-J101-1-7619
anha.fm
12.07.01
Guarantee
Over the guarantee period from the date of purchase from the stock-
ist, Siemens AG will rectify all material or manufacturing defects by re-
pairing or replacing the defective device.
As of 01.01.2002, the European guarantee period will be 12 months.
The guarantee does not cover damage caused by improper use, wear
and tear or third party access. The guarantee shall not cover consum-
ables or defects which only slightly decrease the value or serviceability
of the device.
Service:
www.siemens.com/troubleshooting
The ringer/dialling
tone cannot be
heard.
You have changed
the telephone cord
on your Gigaset.
Ensure, when purchasing
a new cord, that it has
the correct pin assign-
ment (3-4 assignment of
the telephone leads/
EURO CTR37).
Error beep is gen-
erated (descend-
ing tone se-
quence)
Wrong input Repeat the procedure;
note the display and, if
necessary, refer to the
operating instructions.
Abu Dhabi:
Siemens hotline 02 6423800
Egypt
Siemens hotline 01 33 13 144
Ivory Coast
Siemens hotline 80 000 333
Kuwait
NGEECO 481 87 49
Morocco
Setel S.A. 22 669232
Oman
Siemens hotline 79 10 12
Pakistan
Siemens hotline 02 15 67 35 65
Republic of
South Africa
Siemens hotline 08 60 10 11 57
Saudi Arabien
Siemens hotline 02 6515094
Tunisia
Siemens hotline 01 86 19 02
Fault Possible cause Solution