Filter
Top Products
28
Press keys:
Registering and de-registering handsets
Gigaset 4010 Classic, GBR, A31008-G4010-J101-1-7619
mobilt_an.fm
11.07.01
Manual registration
Gigaset 4000 handsets at the Gigaset
4000 base station
If a handset has already been registered at a different
base station, you must now register it at your base sta-
tion. The Gigaset 4000 Classic handset cannot be reg-
istered at more than one Gigaset 4010Classic base sta-
tion at one time.
Step 1:
OOOOOOOOOOOO
0(18
Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
5(*,67(5+6
Select the menu item and confirm, is dis-
played.
OOOOOOO
Enter the 4-digit system PIN (factory setting: 0000) and
confirm.
After entering the system PIN, flashes
in the display.
Step 2:
Underside of the base
station
H
Press the key on the underside of the base station
briefly (approx. 5 secs). A signal tone is generated at
the base station. The next unassigned internal number
(1 – 6) is automatically assigned to the handset.
If all numbers are assigned, the internal number 6 is re-
assigned. The handset which was registered under
number 6 is then deregistered.
After about a minute the internal number of the hand-
set is shown in the left-hand corner of the display
(e.g. “2“).
3,1
5(*,67(5+6